Installation and Operation Manual
-‐ 7 -‐
INSTALLATION – Fitting of Integrated Rangehood
Fit 150mm duct spigot (pictured below) with the four 8mm screws provided over the
rectangular hole located at the top rear of the integrated rangehood. Fit 150mm flexible
ducting (pictured below), supplied, to the ducting spigot, Using one of the nylon ties,
supplied, secure the ducting to the duct spigot.
A hole or cutout needs to be made in the centre rear of the removable shelf positioned
above the integrated rangehood for the ducting to go through.
Mount the Integrated Rangehood onto the two tabs on the mounting bracket into the two
matching slots located at the rear of the rangehood. (Fig. 4)
Mounting bracket
Integrated Rangehood
Removable shelf
(Cannot be permanently
fixed if the need for
servicing is required)
Fig. 4
Slots to mount to
tabs of mounting
bracket
Mounting bracket
Integrated Rangehood
Removable shelf
(Cannot be permanently
fixed if the need for
servicing is required)
Fig. 4
Slots to mount to
tabs of mounting
bracket
150mm duct spigot
150mm flexible ducting
