Assembly
Assembling Nativity Set
Step 1. Connect the two segments (top & bottom) of the Stabilizing Bars (D2) together then insert the assembled
sections into the back outside holes on Base Stand (D3) and lock with Cotter Pin (Z). (FIG.1)
Step 2. There are 2 sections for the Left & Right Sides of Stable (C). A top section and a bottom section. Connect the
two sections for both sides by inserting the connecting rod on the bottom of the top section into the matching holes on
the top of the bottom section (FIG.2) then fasten them with Bolt and Wingnut (Y) at the connecting point. (FIG.2). Insert
the connecting rods at the bottom of the Left & Right Sides of Stable (C) into the holes on the Base Stand (D3) and lock
with Cotter Pin (Z) (FIG.2).
Step 3. Insert the connecting rods on the bottom of the Top of Stable (B) into the holes at the top of Left & Right Sides of
Stable (C) and connect the 2 Top of Stable sections together. Connect the Stabilizing Bars to the backs of the Sides of
Stables. (FIG 3)
Step 4. Insert the connecting rods of the Cross Bar (D1) into the matching holes on the Top of Stable (B). Secure the
Top of Stable to the Sides of Stable with the Bolt and Wingnut. Use Plastic Ties (V) to secure the Sides of Stable to the
Base Stand. (FIG.4)
Step 5. Insert the rods of the Support Bar for Mary (D4) into the matching holes on the back of Mary's Head & Body (F)
then attach the connecting rods on the base of Mary into the Left Base Stand. Insert the rods at the bottom of Support
Bar of Mary (D4) into the holes of Left Base Stand (D3) and lock with Cotter Pin (Z). (FIG.5) .
Step 6. Insert the connecting rods of Mary's Hair (E) into the holes on the top of Mary's Head. Insert the rods of Mary's
Arm (G) into the matching holes on the Body. Secure with Plastic Ties (V). (FIG.6)
Step 7. Insert the connecting rods on the bottom of Joseph's Head & Body (I) into the matching holes on the top of
Joseph's Lower Body (J) and fasten them with Plastic Tie (V). Insert the rods of Support Bar for Joseph (D5) into the
matching holes on the back of Joseph's Head & Body (I) and the other end into the matching holes of Right Base Stand
(D3). Insert the rods at the bottom of Joseph's Lower Body into the matching holes of Right Base Stand (D3) then lock
with Cotter Pin (Z). (FIG.7)
Step 8. Insert the connecting rods of Joseph's Hair (H) into the holes on the back of the Head. Insert the connecting
rods of Joseph's Right Arm (L) and Left Arm (M) into the matching holes on the Body. Secure all parts with Plastic Ties
(V). (FIG.8)
Step 9. The Lantern (N) has three sections. Insert the connecting rods on the Lanterns upper and lower sections into
the matching holes of the middle section then fasten them together with Plastic Tie (V). (FIG.9)
Step 10. Insert the connecting rods of the Quilt (Q) and the Head of Bed (R) into the matching holes on the Baby Bed
(S). Insert the rods of Baby's Hair O) into the matching holes of Baby's Head & Body (P). Insert the connecting rods of
Support Bar for Baby's Bed (D6) into the matching holes on the back side of Quilt and Baby Bed (Q&S) and lock with
Cotter Pin (Z). (FIG.10)
Step 11. Assemble the two halves of the Cane (K) and place the Cane in the hole of Joseph's right hand. Hang the
Lantern (N) on the holes of Joseph's left hand. Secure the Nativity with Stable to the ground with the "U" Shape Stake
(U). ( FIG.11)
Step 12. Insert the connecting rods on the back of the Star (A) into the matching holes on the Top of Stable. Attach the
Anchoring String (T) clips to the matching loop at the Top of Stable sides. Place the "U" Shape Stake thru the free end of
each Anchoring String then tightly secure to the ground evenly. (FIG.12)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 44.4Watts (0.37Amps). Do not overload.
Do not connect to other lighting strings, decorative outfit or other electrical products. Before you use or re-use this
product inspect it carefully. Return to place of purchase or consult a certified Electrician if the product has cuts, damage
or frayed wire insulation on cords, cracks in the socket enclosures, loose connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the
product, wire and lighting connections. If the product is placed somewhere other than the ground it should be well
secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1 FIG.2 FIG.3
FIG.4 FIG.5 FIG.6
FIG.5
FIG.7 FIG.8 FIG.9
FIG.10 FIG.11 FIG.12
