ASSEMBLY
1. Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (F&G) into the
connecting holes on the underside of the Body (D). Fasten together at
the connecting loops or over the metal frames with Plastic Ties (K). The
Legs come with metal bars attached to stabilize the Deer. Insert the
hooked end of the metal bars into the metal hole on the opposite Leg.
2. Assembling the Head to the Body
There is a pair of hooks on the back edge of the Head/Neck (C). Attach the
hooks to the front edge of the Body (D). Insert the end of the long
Connecting Bar attached to the Motor to the metal rod at the base of the
Head/Neck and lock with the Cotter Pin (I).
3. Assembling the Antlers and Ears to the Head
Insert the connecting rods on both the Antlers and Ears (A&B) into the
matching holes at the top of Head (C). Note: The Ears go to the outside
of the Antlers.
4. Assembling the Tail to the Body and attach the Bow
Insert the connecting rod on the Tail (E) into the connecting hole at the rear
of the Body. Insert the tie wires on the Bow (H) through the material on the
Body then twist the wires together on the backside to secure.
5. Securing the Deer to the Ground
Secure the Deer to the ground with the Ground Stakes (J).
