Assembly
Assembling the Cone Tree
Step 1. Place the matching rounded four Base section pole ( Part E ) on the floor. Insert one end of
each Bar into the corresponding holes in the sections to shape a whole circular base. (FIG.1)
Step 2. Insert the Lower section pole ( Part D) into the base section by matching the rod and hole. Insert
the Upper section pole (Part C) into the matching Lower section pole by pressing the button attached to
the end of the lower pole to align. Insert the top end of upper section pole into the matching hole of the
Rib Cap (Part B) to shape the contour of the cone tree. (FIG.2)
Step 3.Insert a tab on the Top Star (Part A) thru the matching hole on top of the Rib Cap (Part B).
Scatter the lighting set by aligning each lighting string with the stacked poles of the cone then fasten the
lighting string to hole on the base section pole with the wire ties attached to the end ot the lights .
(FIG.3)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts
(0.06Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
FIG.3
