ASSEMBLY for 4ft Spiral Tree
1 Assemble the Spiral Tree Pole Section and Base Tree
Stand for Indoor Use
Place the Base Tree Stand (E) on flat ground or surface. Connect the
Two Pole Sections (D) on top of the Base Tree Stand (E) connecting
pole with the tapered ends up. Place the Plastic Cap (C) on top of the
Top Pole Section with the flanged end down.
2 Assemble the Spiral Tree over the Pole Section and Base
Tree Stand
Place the Spiral Tree (A) over the assembled Pole Section and align the
hole on the plastic top over the Pole Section and Plastic Cap. Allow the
Spiral tree to "drop" down to the ground. Align the bottom of the Star Tree
Topper with the top of the Plastic Cap (C). Hook the bottom of the Spiral
Tree to 2 sides of the Base Tree Stand (E) with the hooks attached to the
wires. (see diagram below)
3 Assemble the Spiral Tree Pole Section and Base Tree Stand
for Outdoor Use
Position the Tree Stand (E) sideways so that the sharp Stake end is facing
down. Insert it into the Ground. Use the Driving Cap (B) , if needed, on top
of the Base Tree Stand pole by lightly striking it with a hammer to assist in
inserting the Stake end into the ground. (Remove Driving Cap (B) is used)
Connect the two Pole Section (D) on top of the Stand. Place the Plastic
Cap (C) on top of the Top Pole Section.
4 Assemble the Spiral Tree over the Pole Section and Securing
the Spiral Tree to the Ground
Place the Spiral Tree (A) over the assembled Pole Section and align the hole
on the plastic top over the Pole Section and Plastic Cap. Allow the Spiral tree
to "drop" down to the ground. Align the bottom of the Star Tree Topper with
the top of the Plastic Cap (C). Hook the bottom of the Spiral Tree to 2 sides
of the Base Tree Stand (E) with the hooks attached to the wires. (see
diagram below)
E
C
D
A
A
E
C
D
E
A
A
