CLEANING:
Should you experience low fog output after many hours of continuous operation or after the machine
has been idle or in storage for a long time, it is recommended to run a cleaning solution through the
system to prevent the accumulation of particles in the heating element.
a. While the unit is unplugged and cool, empty all Fog Liquid from the machine and replace with a
fog machine cleaning solution in the tank. SVI Fog Machine Cleaning Fluid (not included) is
recommended. Plug unit in and allow to warm as usual.
b. Run unit in a well-ventilated area until tank is empty.
c. Cleaning is now complete.
All fog machines are prone to clogging due to the consistency of Fog Liquid and the high
temperatures at which it vaporizes. However a well maintained machine should provide years of
reliable use.
STORAGE:
It is important to remove all fluid from the unit when storing for an extended period of time.
1. When the unit is unplugged and cool, empty all Fog Liquid from the machine. Plug in unit and allow
to warm as usual.
2. Run unit in a well-ventilated area for 10-seconds to confirm tank is empty and dry.
3. Store on a flat, level surface. Keep in a well-ventilated, cool and dry location.
For best performance, operate unit for 10-minutes every 3 months. Follow the Operation Instructions
and Storage instructions accordingly.
FUSE REPLACEMENT
If the unit does not function at all when connected to the main power supply then it is highly likely that
the fuse has blown.
WARNING
: Risk of electric shock and fire. Disconnect from main power supply before attempting
to replace fuse.
1. Turn the fuse knob counterclockwise to reveal the fuse.
2. Replace the fuse with the same size and type of fuse: 10A, 125V
3. Place fuse in cover and reinstall by turning clockwise. Be sure not to overtighten.
Congratulations on the purchase of your new fog machine!
