ASSEMBLY
1 Assembling the Legs to the Body
Insert the metal connecting rods at the top of each Leg (F,G) into the
matching connecting holes on the underside of the Body (D).
2 Securing the Legs to the Body
Fasten the Legs and Body together at the connecting loops with Plastic Ties
(K). The Legs come with metal bars attached to stabilize the Deer. Insert the
hooked end of the metal bars into the metal nut on the opposite Leg.
3 Assembling the Head/Neck to the Body
Insert the connecting rods on the bottom of the Head & Neck (C) into the
matching connecting holes on the top edge of the Body (D) and fasten
together at the connecting loops with the Plastic Ties (K).
4 Assembling the Antlers to the Body
Insert the connecting rods on both Antlers (A) into the matching connecting holes
at the top of Head (C).
5 Assembling the Ears to the Body
Insert the connecting rods on both Ears (B) into the matching connecting
holes at the top of Head (C). Note: The Ears go to the outside of the Antlers.
6 Assembling the Tail
Insert the connecting rod on Tail (E) into the connecting hole at the rear of the
Body (D).
7 Assembling the Bow to the Deer
Insert the wires of the Bow Tie (H) through the holes of the body then twist the
wires together to secure.
8 Assembling the Ground Stakes
Insert the Ground Stakes (L) over the metal frame at each hoof then firmly into
the ground.
D
F
G
K
D
K
C
C
A
B
C
E
D
H
L
