ASSEMBLY
1 Assembling the Base Stand to the Lower Section
Insert the connecting rods on the Base Stand (E) into the connecting
holes on the bottom of the Lower Section (C) then secure together at
the connecting loops with the Bolt & Wingnuts (I).
2 Assembling the Stabilizing Bar to the Lower Section
Insert the connecting rods on the Stabilizing Bar (D) into the matching
connecting holes on the lower section (C) and the Base Stand (E) then
secure together with the Cotter Pins (L).
3 Assembling the Middle Section to Lower Section
Plug the lighting power cord from the Middle Section with the Lower
Section. Insert the connecting rods on the bottom of the Middle Section
(B) into the connecting holes on the top of the Lower Section (C) then
secure together at the connecting loops with the Bolt & Wingnuts (I).
4 Assembling the Upper Section to Middle Section
Plug the lighting power cord from the Upper Section with the Middle Section.
Insert the connecting rods on the bottom of the Upper Section (A) into the
connecting holes on the top of the Middle Section (B) then secure together
at the connecting loops with the Bolt & Wingnuts (I).
5 Assembling the Holly Berry & Ground Stakes
Insert the wire on the backside of the Holly Berry (E1) through the
material on the Upper Section of Tree (A) then twist the wire together
to secure. Insert the Ground Stakes (K) over the metal frame of the
Base Stand (C ) at each corner then into the ground firmly.
6 Attach the Anchoring Strings and Ground Stakes
Hook the plastic clipped end of each of Anchoring String (J) onto the metal
loops on top of the Upper Section (A). Attach the Ground Stakes (K)
thru the looped free end of each Anchoring String (J) then tightly secure
to the ground evenly away from the Tree at four corners as shown below.
E
I
C
D
E
C
L
B
C
I
I
A
B
K
E1
A
K
J
C
A
