ASSEMBLY
7 Assembling the Stabilizing Bar
Insert the connecting rods on Stabilizing Bar (O) into the matching holes in
the Penguin's Body (C) and the Base Stand (N) then secure with the
Cotter Pin (U).
8 Assembling the Left Wing and Scarf Penguin D
Insert the rods on the Left Wing (H) and the Scarf (I) into the matching holes
of the Penguin's Body (D) .
9 Assembling the Penguin to the Slide
Insert the upper connecting rod of Support Frame of Penguin (P) into the
matching hole on the back of Body of Penguin (D) then lock them with
Cotter Pin (U) then attach the swivel rod into the matching hole on the
Penguin Body (D). Insert the connecting rods of the Penguin's Body (D)
into the connecting holes of the Section of Slide (M) and fasten at the
connecting loops with Plastic Ties (S).
10 Assembling the Ground Stakes
Insert Ground Stakes (T) over the metal frame of the Slide and the Base
Stand (per the diagram below) then into the ground firmly.
U
O
N
C
I
H
D
S
D
M
P
U
T
