ASSEMBLY
1 Assembling the Lower Body
Align the two Lower Body Halves (D) with each other then insert the
connecting rods on one half into the connecting holes on the other
half and fasten together at the connecting loops with Plastic Ties (J).
2 Assembling the Upper Body
Align the two Upper Body Halves (C) with each other then insert the
connecting rods on one half into the connecting holes on the other half
and fasten together at the connecting loops with Plastic Ties (J).
3 Assembling the Wings to Upper Body
Insert the connecting rods on the Right and Left Wings (A,B) into the
connecting holes on the Upper Half Body of Ghost (C) and fasten
together at the connecting loops with Plastic Ties (J).
4 Assembling the Upper Body to the Lower Body
Insert the connecting rods at the bottom of the Upper Body (C) into the
connecting holes at the top of the Lower Body (D) and fasten together at
the connecting loops with Plastic Ties (J).
5 Attaching the Spring to the Body
Insert the connecting rods on the top of the Spring (E) into the
connecting holes at the bottom of the Lower Body (D) then secure
them together at the connecting loops with Plastic Ties (J). Attach
the two horizontal metal connecting rods at the bottom of the
Spring (E) to the connecting holes in the middle of the Base Stand
(F) then secure together at the connecting loop with the Bolt &
Wingnut (G).
6 Assembling the Ground Stakes
Insert the Ground Stakes (K) over the connecting loop or frame at four
corners of the Base Stand (F) then into the ground firmly.
J
D
C
J
A
J
C
B
D
C
J
E
J
D
G
F
F
K
