6. TO ACTIVATE
THIS ITEM CAN BE USED WITH AN AC/DC ADAPTER (INCLUDED) OR BATTERY OPERATED. THE
DIAGRAM SHOWS THE CONNECTION POINT UNDER THE BASE FOR THE ADAPTER.
Requires 3 “AA” batteries (batteries are included).
1. Remove the battery compartment cover, which is located inside Dragon’s mouth. Using a small screwdriver,
remove the safety screw and then remove the battery compartment cover (as shown in the diagram)
2. Clean the battery contacts and also those of the device prior to battery installation.
3. Insert 3 new “AA” batteries with correct polarity and replace cover and safety screw.
4. The ON/OFF switch is located on the battery case. Place the switch into the “ON” position to activate the
“Motion Sensor” function. When activated, the Giant Dragon will come to life. (Note: The “Motion Sensor" is
activate at angle 90° and the detection zone within 4.9 feet). Place the Switch into the “OFF” position for
in-store “Try-Me” feature and press the “Try-Me” button to see and hear a short demonstration.
5. Replace batteries if the movement becomes slow, LED’s become dim or sound is distorted or faint.
Plug the adapter (part N) into a
standard 100V-240V
household outlet.
Part N
AC Adapter
(DC 4.5V, 2A)
Part O
Large
TRY ME button
ON/OFF
Switch
Battery
Case
Speaker
Fog
Tube
H
J
K
B
C
F
G
E
D
I
A
8
