ASSEMBLY
1. Assembling the Legs to the Horse
Insert the metal connecting rods attached to
the Front Legs and Hind Legs (F&G) into the
matching holes on the underside of the Body
(D). The Legs come with metal bars
pre-attached to stabilize the Horse. Insert the
hooked end of the metal bars into the metal
nut on the opposite Leg.
2. Assembling the Head / Neck to the
Body
Insert the connecting rods on the Head/Neck
(A) into the matching holes at the front of the
Body (D) then secure them together with
Plastic Ties (Q). Insert the connecting rods on
the Mane (C) into the matching holes of
Head/Neck (A).
3. Assembling the Tail to the Body
Insert the connecting rods on the Tail (E) into
the rear of the Body (D) and fasten them with
Plastic Ties (Q).
4. Assembling the Collar around the
Neck and Securing to the Ground
Wrap the Collar (B) around the neck of Horse
and connect the velcro fastener. Secure the
Horse to the Ground with the Ground Stakes
(P).
5. Assembling the Body Panel
Align the Right Side Body Panel Trim (J) with
the Carriage Body Panel R (I) then insert the
connecting rods into the connecting holes.
6. Assembling the Body Panel to the
Support Base
Align the Carriage Body Panel R (I) and the
Carriage Body Panel L (K) with each other
then insert the connecting rods on one half
into the connecting holes on the other half and
fasten them with Plastic Ties (Q). Insert the
vertical rod of the Support Base (N) into the
Base Holder Hole on the underside of the
Carriage Body Panels and lock together.
7. Assembling the Roof on the Top of
the Carriage
Insert the connecting rods on both ends of
the Roof (H) into the matching connecting
holes on the top of the Carriage Body Panels.
Fasten them together at the overlapped metal
connecting loops with Plastic Ties (Q).
8. Assembling the Wheels to the
Carriage
Insert the connecting rods of each Wheel (M)
into the matching holes on the underside of
the Carriage Body.
9. Assembling the Horizontal
Stabilizing Bars on the Wheels
Hook each of Horizontal Stabilizing Bars (O)
into the matching holes on the inside of the
Wheels. Secure the Wheels to each other with
the Plastic Ties (Q).
10. Assembling the Decorative Topper
to the Carriage
Insert the rods of Decorative Topper (L) into
the matching holes on top of the roof of the
Carriage.
11. Securing the Carriage to the Ground
Secure the Carriage to the ground with the
Ground Stakes (P).