Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a)
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 0.2 A 120 V 60
Hz.
c) This seasonal use product is not intended for permanent installation or
use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles
or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, or when retiring for the
night, or if left unattended.
h) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
I) Do not cover the product with cloth, paper or any material not part of the
product when in use.
m) This product contains an extension cord with a polarized plug (one
prong is wider than the other) as a feature to reduce the risk of electrical
shock. This plug will fit in a polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not use with an extension cord unless the plug
can be fully inserted. Do not alter or replace the plug.
n) This product is equipped with push-in type lamps. Do not twist lamps.
o) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded.
p) Read and follow all instructions that are on the product or provided with
the product.
q)
SAVE THESE INSTRUCTIONS.
CAUTION! – ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR
DISASSEMBLING.
CAUTION! –
ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING EITHER FUSE OR BULB
REPLACEMENT.
7.5 ft Franklin Fir LED Pre-Lit Tree
SKU# 1000862801
Package Contents
A.
Tree top
Qty: 1
B.
Tree center
Qty: 1
C.
Tree bottom
Qty: 1
D.
Stand with an eye
bolt
Qty: 1
E.
Replacement bulb
Qty: 6
F.
Fuse Qty: 6
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with the
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Carefully insert tree bottom (C) into the tree stand (D). Make sure
pole is firmly inserted into stand and screw is tightened. Insert
tree center (B) into tree bottom (C), insert tree top (A) into tree
center (B).
Step 2. Locate light set plug from tree top (A) and plug into outlet of
extension cord mounted in tree center (B).
Pre-Assembly
Assembly
