IMPORTANT
: Do not remove the tape wrapped around the
outlets of the extension cord mounted in tree center (B). Any
outlets you need to plug into are not wrapped in tape.
Step 3. Locate light set plug from tree bottom (C) and plug into outlet of
extension cord hanging down from tree center (B).
Step 4. Allow branches to fall into place or gently pull branches up and out.
When adjusting branches be sure that all wires are free of branch
hinges.
Step 5. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the
main stem. Repeat pattern for each branch.
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose, broken
bulbs and /or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Maintenance
Fuse Replacement
A)
Light set fuse replacement (replaceable 3-amp 125V fuses)
1.
Grasp plug and remove from its power source.
2.
Locate blown fuse(s) by sliding access cover on top of plug towards
prongs.
3.
Remove blown fuse by turning the plug over.
Fuse should fall into your hand (Gentle tapping
may be required).
4. Locate Spare 3-amp fuses in plastic bag.
5. Insert new fuse. Close fuse cover by sliding fuse access cover
towards the cord.
CAUTION
:
To reduce risk of fire – replace fuse in light set plug
with only 3-amp 125 volt fuse. Do not replace attachment plug. Discard
product if the attachment plug is damaged
.
B)
Extension cord fuse replacement (1 replaceable 5 A, 125 V fuse is
located in the plug):
Note: This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not use with an extension cord unless plug can be fully
inserted. Do not alter or replace the plug.
1.
Grasp plug and remove from its power source.
2.
Locate blown fuse by sliding access cover on top of plug towards
prongs.
3.
Remove blown fuse by turning the plug over. Fuses should fall into
your hand (gentle tapping may be required).
4. Locate spare replacement fuse included in plug.
5. Insert spare replacement fuse. Close fuse cover
by sliding fuse access cover towards the cord.
CAUTION
: To reduce risk of fire – replace fuse in extension
cord with only 5 A, 125 V fuse. Do not replace attachment plug. Discard
product if the attachment plug is damaged.
BULB REPLACEMENT:
1.
Grasp plug and remove from its power source.
2.
Unlock the lock on the bulb socket.
3.
Pull bulb AND plastic base straight out of socket. Do not twist bulbs
while you are removing them.
4.
Replace burned-out bulb with 3 V, 0.06 W LED bulb ONLY.
(Additional bulbs are included for your convenience.)
5.
Relock the lock on the bulb socket.
If the new bulb base does not fit in bulb holder, follow these steps:
Remove the cover.
Remove the base of the burned-out bulb by straightening the bulb
leads, and gently pull bulb out.
Thread leads of new bulb through
holes in old base with one lead in
each hole.
After bulb is fully inserted into base, bend each lead up so that the
leads will touch the contacts inside the bulb holder.
Insert the cover.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall outlet and then unplug each section
of the tree.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
cUL Model No. CHL-003S
Troubleshooting
Problem
Solution
The tree
does not light
Ensure that all tree sections are plugged into each
other and that the tree is plugged into the wall outlet.
Check for blown fuses at the extension cord and light
set plugs. Replace as needed with the replacement
fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.
