5
EN
C
B
A
As shopping car
WARNING:
l
For easy towing and safe handling, check tires often for proper inflation and
wear. Check tire pressure regularly and inflate tires to within the range shown
on the tire sidewall.
l
Failure to properly install wheels could allow them to come off during use. This
could lead to serious injury.
Attaching the Trailer to Bike
Steps:
(Hitch Connector may be pre-install from the factory)
1. Pull out the bicycle seat tube,Quick removal tube bundle ring socket pipe.
2. Fix the seat pipe in place.
3. Open the fixed towing rod pin and pull out the towing rod.
4. Connect the towing rod to the connector.Install fixed pin.
5. Pull out the support pipe and install it as shown.
6. Fasten the connector to the appropriate height of the seat pipe and lock it.
Installing the Wheels
Steps:
1. Turn the unit on it's back.
2. Slide each Wheel Shaft (A) into the Trailer Axle (B).
3. Press the Lock Button (C) until the Wheel locks into position and cannot be
pulled out. .
4. Repeat for opposite side.
NOTE:
To remove the Wheel, push in the Lock Button and pull the Wheel out of the
Axle.