iSUP User Manual
I.Packing List
Package Includes:
Inflatable SUP x 1;
Adjustable sup paddle x 1;
Removable center fin x 1;
High pressure dual-action pump x 1;
Repair kit(PVC +glue+ wrench) x 1;
Backpack x 1;
User Manual x 1;
Coil leash x 1.
3-1 Unroll
3-2 Pump connection
3-3 Inflation
3-4 Slide-in the fin
3-5 Cilp the fin
3-6 Finish
4.Deflation & Fin Removal
4-1 Drag out the clip
4-2 Remove the fin
4-3 Pump out the air
4-4 Press to deflation
4-5 Roll up
4-6 Finish
5.Valve & Fin Introduction
The plastic nib in lower position is for deflation, keep in the upper position is for inflation as well as avoid
air-leak, pls see the diagrammatic illustration on the right.
Cases need your attention:
1. When there is air-leak from the valve or if the air can not be inflated into the iSUP, pls check the
position of the plastic nib first, keep it in the upper position. If it's ok, pls follow case 2.
2. The valve may sometimes loosen, pis use the wrench to tighten it.
3. If the valve, you can also use the wrench to replace it.
See details from below diagram.
5-1
｜｜
5-2
｜｜
5-3
营
冒雪
CJ
审
2.Warm Reminder
A long-lasting iSUP needs your careful care, tips below worth your attention:
囚
2.Pump using instruction
：
Pls try pump according to test video before use, the side marked
with
”
OUT
”
is for inflation (only when the pressure reaches to certain amount of PSI will the
pressure gauge pe
「
ceive it and push the pointer to move/spin, normally 5 PSI).
rn3. Avoid long time constant overexposu
「
e to the merciless sun
rn4. Trim your dog
’
s nails or put a t
「
action pad on if he stands in front of the iSUP paddle board to
avoid scratches.
囚
5.Storage: rinse your board with fresh water,dry completely,fin off,store deflated and leave the sun
.
3.lnflation & Fin Installation
single use
1. PSI <= 15 PSI ( Pls pay more attention to the pressure when using mechanical pump
do not over-inflate).
囚
