3
1. Turn the thermostat switch to the minimal value, at the same time turn the heat select
switch to the “0” position.
2. Plug in the appliance, and turn the thermostat switch to the maximum position. Then
turn the heat select switch to choose air or warm air and the temperature of warm air as
below. While working the indicator light will be on.
2.1 Turn the heat select switch to “ “position, the heater blows cool air.
2.2 Turn the heat select switch to “I” position, the heater blows warm air, working at Low.
2.3 Turn the heat select switch to “II” position, the heater blows warm air, working at High.
2.4 Turn the heat select switch to “0” position, the heater stops working, the indicator light
will be off.
3. Adjust the thermostat switch to suitable position for desired temperature setting.
3.1 When you feel the room temperature comfortable, turn the thermostat switch anti-
clockwise slowly to the minimal position until the appliance stops working.
3.3 Then the thermostat switch will keep the room temperature at the desired temperature
automatically.
4. Tip over safety switch is designed to switch the heater off in the event that it is lifted or
falls over. If the heater is placed on a very indented surface or on a carpet with
exceptionally long, soft pile the safety switch may prevent the heater from turning on.
Should this happen replace the heater on a firmer, smoother, surface.
SECURITY SYSTEM
1. To avoid risk to human being or damage to internal components, the ceramic heater has
a security system which will automatically switch off the appliance if the heat reaches
the safety limit. If overheating occurs:
1.1 Turn the heat select switch to “0” position, turn the thermostat switch to the minimal
position and remove the plug from the socket.
1.2 Check if the air flows smoothly before the outlet and inlet, and if the appliance is put in
right position. If so, get it in order before restart the appliance.
1.3 Let the ceramic heater cool down for at least 10 minutes before you start it again.
1.4 Plug in the appliance and switch it on. If the appliance can't operate normally, remove
the plug immediately from the socket and have the ceramic heater serviced by an
appointed service only.
MAINTENANCE AND CLEANING
1. Before you turn off the appliance, turn the heat select switch to the “ “position. After
operating for 3 to 5 minutes to lower the internal temperature of appliance, and then
turn the heat select switch to “0” position.
2. Clean the air inlet and air outlet of the appliance regularly (at least twice a year
normally).
3. Before you clean the appliance, turn off the heater first, then remove the plug from the
socket, and wait until the appliance cools down.
4. Use a damp cloth to clean the surface of appliance, avoid water going inside the
appliance, dry the appliance before use or store.
1. DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of
such waste separately for special treatment is necessary.
2. This product must not be disposed together with the domestic waste. This product has
to be disposed at an authorized place for recycling of electrical and electronic
appliances.
3. By collecting and recycling waste, you help save natural resources, and make sure the
product is disposed in an environmental friendly and healthy way
EN
