9
INSTRUCTION FOR USE
Expansion plugs and screws, provided
with the product, are only suitable for
concrete or solid brick walls. For different
wall material types, use the appropriate
fixing means.
INSTALLATION
ELECTRICAL
CONNECTIONS
By means of the illuminated switch the
radiator can be switched on and off.
USE OF THE PRODUCT
Avoid using acid-based product.
Do not use products containing
sodium hypochlorite, chlorine-based
detergents, or those containing bleach
or aggressive solvents that are not
suitable for the cleaning of painted
surfaces. Do not use abrasive sponges.
In the event of overheating, the safety
internal device automatically detaches
the ceramic heater element. The radiator
will start again to operate as soon as the
temperature returns below the safety
threshold.
CLEANING
MALFUNCTION EVENTS
The product must be powered at a
voltage of 230 Vac, 50 Hz.
The product is supplied, depending
on type, with a Schuko plug cable to
connect to a proper socket, or with a 3
core cable for a permanent installation
to the main power supply (Brown = Live,
Blue = Neutral, Green/Yellow = Earth ).
Always make observe the minimum
distances from wall, furniture or other
objects as showed (fig. A, pag 3).
The appliance has a grade IPX4 water
protection. The product may be used in
bathrooms or humid places as long as
the safety zones are respected. In any
cases avoid installing the appliance
in location where there is a lot of
condensation.
It must never be possible for person in
the bath tub or shower to reach the
power switch.
If malfunction operating is
noted or the damaging of the
panel appear, disconnect the
radiator from the main supply
and contact the dealer.