HOM Xilo L Installation Instruction Download Page 8

8

INSTRUCTION FOR USE

Please read these instructions carefully 

before beginning installation to ensure 

the appliance is installed safety and 

correctly.
Installation should be performed by 

qualified 

professional 

only. 

Local 

installation standards should be applied.
Before any operation remove the 

packaging and check appliance 

integrity. If any defect or damage are 

noticed do not install or try to repair the 

appliance but inform the retailer. 
The packaging should be kept out 

of reach of children and disposed 

in accordance whit the national 

regulations for waste processing. 
Do not modify or disassemble the 

appliance. Do not remove the ceramic 

heater. It may cause fire, electric shock 

or injury.
This appliance is designed and produced 

for home use only and is not suitable for 

installing and using in public places or on 

vehicles, boats or aircraft.

BEFORE USING  

THE PRODUCT 

Use a single-phase alternating current 

230  V,  50  Hz  power  supply.  Voltage 

in excess of 230 V +10 % may cause 

malfunction,  so  stay  within  the  rated 

range.
Electrical wiring work should be done by 

a certified professional in conformance 

with local standards. 
Be sure to install a ground-fault circuit 

interrupter with idn < 30 mA
WARNING: To avoid overheating, do not 

cover the radiator.
Do not hang anything on the radiator 

while it’s working.
This is a CLASS I electric insulation 

appliance and must be properly 

grounded.
If a product with Schuko plug is installed 

FOR YOUR  

SAFETY  

in France, connect it to the main power 

supply by cutting off the plug and 

adopting a suitable connection box.
The electrical connection to the main 

power supply must also include a bipolar 

switch with a minimum contact aperture 

of 3 mm.
If the electric cable or the plug are 

damaged and has to be repaired do 

not perform this repair by yourself. Bring 

the product to a qualified repair centre 

and have them repaired by specialised 

personnel in order to avoid any risk of 

damage.
Never use the product in rooms that are 

saturated  with  explosive  gas,  vapours 

generated by solvents or paints or any 

other flammable vapours or gas.
This appliance is not intended for use 

by young people or by persons who 

possess  limited  physical,  sensorial  or 

mental capabilities unless they are 

adequately supervised by a responsible 

person to ensure that they can use the 

appliance safely. Young children should 

be supervised to ensure that they do not 

play with the appliance.
Never allows animals or children to play 

with or touch the appliance.
Attention!  When  turned  on,  the  panel 

may become very hot.

Never leave your home while the 

appliance is turned on; make sure

Never install the appliance on a surface 

made of wood or synthetic material.
Always place this appliance in vertical 

position so that the switch results on the 

down side of it.
Do not climb on the appliance.
Never place this appliance immediately 

underneath a power socket.

SAFE  

POSITIONING 

Summary of Contents for Xilo L











Reviews: