Holzstar HBS 400, Operating Instructions Manual, Page: 2 / 18

Operator Safety: Required Reading
Important
Safety is the single most important consideration in the operation of this equipment.
The following instructions must be followed at all times.
There are certain applications for which this tool was designed. We strongly
recommend that this tool not be modified and/or used for any other application other
than that for which it was designed. If you have any questions about its application, do
not use the tool until you have written us and we have advised you.
General Safety Warnings
KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s
applications, work capabilities, and the specific potential hazards peculiar to it.
DANGER! ALWAYS GROUND ALL TOOLS.
If your tool is equipped with a three-pronged plug, you must
plug it into a three-hole electric receptacle. If you use an
adapter to accommodate a two-pronged receptacle, you
must attach the adapter plug to a known ground. Never
remove the third prong of the plug.
ALWAYS AVOID DANGEROUS ENVIRONMENTS.
Never use power tools in damp or wet locations. Keep your
work area well lighted and clear of clutter.
DANGER! ALWAYS REMOVE THE ADJUSTING KEYS
AND WRENCHES FROM TOOLS AFTER USE.
Form the habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning it on.
ALWAYS KEEP YOUR WORK AREA CLEAN.
Cluttered areas and benches invite accidents.
DANGER! ALWAYS KEEP VISITORS AWAY FROM
RUNNING MACHINES.
All visitors should be kept a safe distance from the work
area.
ALWAYS MAKE THE WORKSHOP CHILDPROOF with
padlocks, master switches, or by removing starter keys.
1