5
WARNING!
IF ANY PART IS MISSING OR DAMAGED, DO NOT PLUG THE WOOD LATHE IN
UNTIL YOU HAVE REPLACED THE MISSING OR DAMAGED PART.
For you satiety, complete the assembly of the lathe before plugging it into the power supply.
1. Lathe bed assembly
2. Face plate
3. Headstock spur center
4. Tailstock cup center
5. Push rod
6. Flat wrench
7. Hex key
8. Instruction manual
9. Hex bolt and nut
10. Stand
11. Handle
12. Extension bed
Assembly
Leg Set Assembly
q
Attach one front leg and one back leg (1) to the outside edges of the top
plate (2) using carriage bolts (3), washers (4) and nuts (5). The top plate
(2) should fit
inside
the legs (1). Do not tighten nuts at this time.
Fig 2
q
Repeat this procedure for the remaining legs and top plate.
q
Attach the long plate (6) to the legs using carriage bolts, washers and
nuts.
q
Place the leg stand on a level surface and tighten
all
nuts securely using
a 14mm wrench.
Summary of Contents for DB 900
Page 1: ...VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL ...
Page 12: ...11 Wiring diagram Parts break down ...
Page 13: ...12 ...
Page 16: ...www holzstar de ...