10
DB 1202 | Version 3.05
Operation
7.3 Electrical connection
Step 1: Plug the plug into a 230V power outlet.
Step 2: The machine is now ready for operation.
8
Operation
8.1 Start the machine
Step 1: Select the direction of rotation by means of the
direction switch.
Step 2: Unlock emergency stop button.
Step 3: Press the pressure switch "ON".
8.2 Turn off the machine
Step 1: Press the pressure switch "OFF“
8.3 Speed change with potentiometer
You can continuously set the speed of the lathe in two
speed ranges.
DANGER!
Danger of electrocution!
There is danger to life when in contact with live com-
ponents. Switched on electrical components can
cause uncontrolled movements and lead to serious
injuries.
DANGER!
All work on the electrical installation may only be car-
ried out by a qualified electrician.
NOTE LUBRICATION!
Before starting the lathe, all moving parts must be
greased. To lubricate the shifter shafts and drive
shafts, the belt cover must be removed. Only one
adhesive grease may be used here, otherwise it
could lead to malfunctions!
In addition, guides, sleeves and bearings must be
lubricated or lubricated with commercially available
lubricating grease.
DANGER!
Danger of electrocution!
There is danger to life when in contact with live compo-
nents. Switched on electrical components can cause
uncontrolled movements and lead to serious injuries.
- Disconnect the power before starting adjustments to
the machine.
WARNING!
Risk of Death!
There is danger to life for the operator and other per-
sons if they do not adhere to the following rules.
- The Wood Lathe may only be operated by a trained
and experienced person.
- The operator may not work while under the influ-
ence of alcohol, drugs or medication.
- The operator must not work when he is tired or suf-
fering from concentration-impairing illnesses.
- The Wood Lathe may only be operated by one per-
son. Other persons must keep away from the work
area during operation.
ATTENTION!
Crushing!
Incorrect work on the machine can cause injury to the
upper limbs.
DANGER!
Before commissioning, check the electrical connec-
tion, lines and contacts.
Wear ear protection!
Wear safety glasses!
Wear safety shoes!
Wear protective clothing!
NOTE!
If the turning lathe comes to a standstill, pull out the
connection plug.
