TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
13
WEWA1216SET
11.4
Special safety instructions for that product
•
Observe the permissible loading capacity. Do not overload the
product
!
•
Pay attention to the correct distribution of the load on the table. Do not concentrate the
load on one side.
11.5
Hazard warnings
Despite their intended use, certain residual risks remain. Due to the design and construction of the
product, hazardous situations may occur when handling the products, which are identified as
follows in these operating instructions:
DANGER
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
CAUTION
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTICE
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the product.
Safe working depends first and foremost on you!
TRANSPORT
For proper transport, follow the instructions and information on the transport packaging
regarding centre of gravity, attachment points, weight, means of transport to be used and
prescribed transport position, etc.
Transport the product in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
•
Lifting, Depositing
Ensure stability when lifting / setting down (legs hip width).
Lift / lower load with bent knees and straight back (like weightlifter).
Do not lift / lower the load jerkily.
•
Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
Always secure the assembled
product
during transport in the transport position to prevent
damage to the
product
.