ASSEMBLY
16
WB210C
2.
Assemble corpus
Screw the two side panels (6, 7) to the left and
right outer edges of the base plate (5). Pay
attention to the side panels in relation to the
guide rails and hinges.
Place the two dividers incl. drawer runners (8)
in the groove (9) of the base plate and screw
them tight. Make sure that the dividers are
positioned correctly in relation to the drawer
runners.
Turn the corpus 90 ° onto the base plate.
Slide the rear plate into the groove of the side
panels and the base plate (10).
Place the top plate on the corpus (11). The rear
plate fits into the groove of the top plate (12).
Screw the top plate into the openings
provided on the corpus (13).
3.
Assembly drawer
Slide the drawer back panel into the groove of
the drawer side panels (15).
Make sure that the guide rails is in the correct
position and that there is a continuous groove
on the inside.
Slide the drawer bottom into the groove (16).
Make sure that the smooth side is on the
inside.
Slide the drawer front panel onto the drawer
body and screw it tight (17).
Repeat this procedure with the 5 other
drawers.
4.
Assembly base frame with corpus
Push the corpus into the base frame (18).
Make sure that the front of the corpus
matches the front of the base frame.
