ASSEMBLY
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 21
ROHRSCHLEIFGERÄT / TUBE BELT SANDER RSG 760
13
ASSEMBLY
13.1
Delivery content
The machine is delivered pre-assembled.
For transport reasons, some parts of the machine can be assembled by the customer.
Check right after receiving the machine, whether all parts according to the parts list are complete
and without damage. Each visible defect and in particular wrong amounts and transport damages
must be clearly noted on the delivery documents, otherwise the goods shall be considered as
taken over and fully accepted under the sole responsibility of the customer.
13.2
Assembly
13.2.1 Handle
Place the handle in front on the abrasive guard and tighten by hand.
13.2.2 Install abrasive
1. Release the tensioner arm and remove the sanding belt.
2. Place the new sanding belt on the rollers such that its direction of circulation (arrows on
the inside of the sanding belt) matches the arrow on the protective cover.
3. Release the tensioner arm and ensure that the sanding belt is completely on the rollers.
Summary of Contents for RSG 760
Page 32: ......