SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
9
WSR40PRO
11
SAFETY
This section contains information and important notes on safe start-up and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property. In
addition, observe the symbols and pictograms used on the machine as well as the
safety and hazard information!
11.1
Intended Use of the Machine
The machine is for use with water only.
HOLZMANN MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
11.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
max. 70 %
Temperature
+5° C bis +55° C
11.1.2
Prohibited Applications / Hazardous Misapplications
-
Operating the machine without adequate physical and mental fitness.
-
Operating the machine without knowledge of the operating instructions.
-
Modifications or changes to the design of the machine.
-
Use the machine as a climbing aid (ladder).
-
For the preparation of food.
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
11.2
User Requirements
The machine is designed to be operated by one person. The physical and mental aptitude as well
as knowledge and understanding of the operating instructions are prerequisites for operating the
machine. Persons who, because of their physical, sensory or mental abilities or their inexperience
or ignorance, are unable to operate the machinery safely must not use it without supervision or
instruction from a responsible person.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
11.3
General Safety Instructions
To avoid malfunctions, damage and health hazards when working with the machine, the following
points must be observed in addition to the general rules for safe working:
The machine may only be operated, serviced or repaired by persons who are familiar with
it and who have been informed of the hazards arising from this work.
Before start-up, check the machine for completeness and function.
When machine is not in use, disconnect it from the water source and open the
nozzle to release the water pressure!
