HOLZMANN MASCHINEN WSR40PRO, User Manual

Page: 10 / 17

ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 10
WSR40PRO
12 ASSEMBLY
12.1 Preparatory Activities
12.1.1 Checking the Delivery Content
Check the machine immediately after delivery for transport damage or missing or damaged parts.
Report any damage or missing parts immediately to your freight forwarder or retailer.
12.1.2 Assembly of machine
The machine has been disassembled for transport and must be assembled before use. Follow the
instructions below:
1. Assembly base-food
Insert the metal tubes of the
base-food (part #10) into the
tube on the hose reel housing
(part #1) until they engage and
the push button pops out..
2. Assembly hose holder
Fasten the hose holder to the
handle with a washer and screw
using a screwdriver.
3. Assembly the wheels
Assemble the wheel on one of the
wheel axles, insert the washer
and cotter pin, bend one end of
the cotter pin and then place the
wheel cover on the wheel. Repeat
the procedure on the opposite
side for the second wheel.
13 OPERATION
Raise/lift the handle until the two side buttons pop out, then connect one end of the inlet-hose to
the inlet of the machine and another side to the faucet. Turn on the faucet.
13.1 Unwind
- Pull out the hose to the desired length
Follow these instructions for use:
N O T E
Please do not step on the pedal while pulling hose out
N O T E
Please evenly pull the hose, do not pull in a very quick speed and stop suddenly. If
the hose could not be pulled out, please stop and check if the pedal is in the high
position and hose is kinked