OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
20
NTS200FLEX
1.
Place the grinding wheel on the left
side of drive shaft and fix with
washer and nut.
2.
Place the leather honing wheel on
the right side of the drive shaft
3.
Mount the leather honing wheel so
that the slots engage on the wheel
and shaft into each other.
4.
Fix the leather honing wheel with
fixing screw and washer.
5.
The water reservoir is equipped
with mounting tabs used to hook
to the slots on the grinder body.
6.
2 positions (horizontal or vertical).
Place the universal holder in the
brackets and fix in desired
position.
7.
Insert the tool holder over the
universal holder.
OPERATION
13.1
Operating Instructions
W A R N I N G
Danger due to electrical voltage! Handling the machine with the power supply up
can lead to serious injuries or death. Always disconnect the machine from the power
supply before servicing or maintenance work and secure it against unintentional
restarting!
13.1.1
Getting-started
Water reservoir:
Fill the water reservoir with water
The grinding wheel must be saturated with water!
The grinding wheel material absorbs water, so the level should be
checked regularly. If necessary refill the water reservoir with water!
