STORAGE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
22
HUB25KG
18.3
Adding Hydraulic Oil
To top up hydraulic oil proceed as follows:
1.
Place the lift truck/ drawbar so that the oil screw (AS) of the hydraulic cylinder is
positioned upwards.
2.
Remove the oil screw (AS).
3.
Top up hydraulic oil with the appropriate specification (L-HV46 hydraulic oil).
(The oil must be up to the thread of the oil tank max. volume 260ml.)
4.
Replace the oil screw (AS) and tighten it.
18.4
Charging the battery
Connect charger to socket (A) and power
supply and charge lead battery. Charging is
complete when indicator (B) on the charger
lights up.
19
STORAGE
N O T E
Improper storage can damage and destroy important machine parts. Store packed or
unpacked parts only under the intended ambient conditions!
In case of a longer interruption of operation or shutdown, clean the machine thoroughly and then
store it in a dry environment protected from frost and other weather influences!
20
DISPOSAL
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available.
If you buy a new machine or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old machine properly.
Summary of Contents for HUB25KG
Page 31: ......
