CLEANING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
21
HUB25KG
- Switching between two weight units (kg/lb).
When the weight is displayed in kg, press the lb/kg key to switch to the pound.
Press the lb/kg button again and the displayed unit returns to kg.
- To turn off the display
Press the ON/OFF button until the display shows "OFF". When you release the button, the unit will
turn off.
More detailed information can be found in the manual of the unit.
17
CLEANING
W A R N I N G
Cleaning work may only be carried out when the pallet truck is lowered and without
load.
N O T E
Wrong cleaning agents can attack the varnish of the machine. Do not use flammable
liquids or detergents that could damage the machine's paint. Observe the information
and instructions of the cleaning agent manufacturer!
Never use a direct water jet or steam for cleaning! Simply clean the pallet truck with a damp
cloth and dry it carefully (e.g. with compressed air) afterwards.
18
MAINTENANCE
W A R N I N G
Maintenance and repair work may only be carried out with the lift truck lowered and
without load. For various maintenance work, the pallet truck must be jacked up and
secured against rolling away and sinking.
The pallet truck is almost maintenance-free. Nevertheless, malfunctions or defects can occur. These
must be eliminated immediately as they can impair the safety of the machine. Also check regularly
whether the warning and safety notices on the machine are present and in a perfectly legible
condition.
18.1
Maintenance Plan
Interval
Component
Activity
Daily
Chassis
Check axles, rollers and wheels for condition, fastening and wear;
remove blockages (e.g. by threads etc.) if necessary; replace
damaged or worn wheels with new wheels of the same dimension
if necessary.
Half a
year
Hydraulic oil
level
Check hydraulic oil level. Vent the hydraulic system if necessary.
If the hydraulic oil is milky white and/or there is water in the
hydraulic system, change the hydraulic oil immediately.
18.2
Bleeding the Hydraulic System
During transport or when using the lift truck on uneven ground, air can enter the hydraulic pump,
which means that the fork is not lifted when pumping in the lifting position.
To remove the air, proceed as follows:
1.
Move the control lever (7) to the lowering position.
2.
Then move the hand drawbar (1) down several times.
=> Normal operation should be possible again.
Summary of Contents for HUB25KG
Page 31: ......
