HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 38
PÁSOVÁ PILA / WOOD BANDSAW HBS 230HQ
16.3.1
Upper blade guide adjustment
The height of the guide must be adjusted prior to each work so that the saw band about 10 mm
ends to the workpiece.
The Locking knob loosen and adjust the appropriate level with the Adjusting knob and then
secure again.
Loosen the knob screw (
A
) and adjust the guide pin so that the distance between the guide
pin is to the saw teeth 1 to 2 mm side. Then fix again.
Loosen the knob bolt (
B
) and adjust the thrust bearing back so that the distance from the
thrust bearing back of the saw blade is ca.0,5mm. Then fix again.
Locking knob
Adjusting
knob
A
Upper blade guide
B
Summary of Contents for HBS 230HQ
Page 56: ......
