HOLZMANN MASCHINEN DKS 21PRO, User Manual

Page: 23 / 38

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 23
DKS 21PRO
 The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable
for outdoor use
 Do not use the cable to carry the machine or to fix the work piece
 Protect the cable from heat, oil and sharp edges

Avoid body contact with earthed components
 Before starting the machine remove any adjusting wrenches and
screwdrivers
 Sharp edges can cause severe cut injuries
 Keep any machine that is not being used out of reach of children
13.3 Remaining risk factors
W A R N I N G
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
 Risk of injury to the hands / fingers by the blade during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a
suitable tool / device workpiece.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contacting with live electrical components.
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury to the hearing by prolonged labor without hearing protection.
Risk of injury due to kickback:
Kickback is a sudden reaction to a jamming, grinding or staggered blade. This causes
the ejection of the workpiece to the direction of the operator.
These risk factors can be minimized through obeying all security and operation instructions,
proper machine maintenance, proficient and appropriate operation by persons with technical
knowledge and experience.