SAFETY
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Seite 19
Druckluft Inverter Plasma Schneidanlage /Welder inverter plasma cutter
DIPA 40 / DIPA 100
11.4
Technical data
Specification
DIPA 40
DIPA 100
Power Voltage
1~230V± 10%;50/60Hz
Three phases 400V± 10%;50/60Hz
Input Current
30A
30A
Rated Output Current
40A
100A
Current .Adjusting Range
20-40A
20-100A
No-load Voltage
200V
400V
Rated Duty Cycle
60%
60%
Working Mode
Contacting/ not Contacting
Contacting/notContacting
Air Pressure
0.2-0.35MPa
0.2-0.4MPa
Cutting Thickness
12mm
35mm
After Flow Time
10S
10S
Outline Dimensions
390×190×290
570×305×570
12
SAFETY
12.1
Intended Use
The machine only in technically perfect condition in accordance with, safety and danger, use it! Interference,
which could affect safety, must be rectified immediately!
It is generally prohibited to modify safety equipment of the machine or to make ineffective!
12.2
Working conditions
The machine is designed for the work under the following conditions:
Relative Humidity
at 40°C max. 50%
at 20°C max. 90%
Betriebstemperatur
from +5°С bis +40°С
max. Height above sea level
2000m
min. illumination
500 Lux
The machine is not intended for outdoor use.
The machine is not intended for use in an environment that is charged electro-magnetic
("electromagnetic").
The machine is not designed for use in a work environment with gases, vapors, etc. deter-
mines which attack the isolation of the electronic components may corrode or destroy.
The machine is not intended for use in potentially hazardous conditions.
The machine is not intended for use in a work environment where vibrations occur regularly,
as these are the efficiency, accuracy and working life of the machine reduced.
