HOLZMANN MASCHINEN BBS 350, User Manual

Page: 28 / 41

CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 28
BBS 350
18.2.3 Adjusting blade guidance
Adjust rolls of the blade guide in a way that
there is a gap between rolls and blade of a
paper width.
To do this, loosen the screws and adjust the
rolls, then tighten the screws again.
18.2.4 Adjusting blade tension
Proper blade tension is achieved if the blade
defects no more than 3-6 cm when it is firmly
moved by hand at the center location of the
blade.
To increase blade tension rotate the lever for
the sawblade tension clockwise.
N O T I C E
Make sure the tracking adjustment
bolt is sitting in recess. See Picture.
18.2.5 Changing the blade

Loosen screws and remove the guides.

Reduce the blade tension and remove
the blade.

Insert the new blade and re-assemble
the guides.

Adjust the required blade tension as
described above.