ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
25
ABS850DBK
5.
Assembly suction port
Loosen both M6x25 screws (12), then place the
suction port (13) on top.
Insert two M6x25 screws (12) on the inside of
the suction port (see picture on the left).
On the lower side (see picture on the right), fix
each with a M6 nut (14) and a M6 washer (15).
6.
Assembly seal and outlet
Attach the seal (16) and the outlet (17) to the
impeller housing and fix them at the corners with
a M6x25 screw (18) each.
Add at the side of the screwhead (front) a M6
washer (19).
On the rear side (see picture), fix at the corners
with a M6 nut (20) each.
7.
Assembly chip bag
Attach the chip bag (21) to the outlet (17) and
secure it with the bag clamp Ø 100-120 (22).
N O T I C E
Install the chip bag and bag clamp
together on the outlet, preferably by
folding the upper few centimetres of
the chip bag over the bag clamp.
Summary of Contents for ABS850DBK
Page 35: ......
