< FLIGHT >
< FLIGHT >
1. Pair the Drone
2. Calibrate the Gyro
3. One Key Start/ Landing
Tips:
To ensure a stable flight, we suggest that the pilot
calibrates the gyro every time after pairing the drone and after
a crash.
After pairing/ calibration, press the One Key Start button, the
propellers will start spinning, indicating this drone is ready to fly, and
you can control this drone by using the joysticks. Press the One Key
Landing button again, the drone will land by itself .
As shown in the diagram above, push the left and right joystick
simultaneously to the lower left corner to calibrate the gyro. The LED
lights on the drone will blink quickly and turn solid. When you hear
one long beep from the transmitter that indicates the calibration is
completed.
①
Connect the battery port
access to the fuselage power
port.
③
Turn on the transmitter.
④
Push the left joystick up then
down to pair the drone with the
transmitter. The LED indicator
lights on the drone will turn solid
if the drone is paired successfully.
TAIL
②
Place the drone on a flat and
level surface with the head
forward and the tail towards the
pilot.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-10-
-11-
All of the following operations on this manual takes MODE
2 for example.
