< INSTALLATION >
< CHARGING >
USB Adapter
([email protected])
Power Bank
Computer USB Port
1. Plug the USB charging cable into a USB charging port on the
computer, power bank or USB adapter
(5V @ 0.5 to
2.0A )
.
2. Connect the wire of battery with USB charging cable.
3. Charging time: about 40 minutes.
4. The red indicator light on the USB charging cable will turn
on when the battery is under charging; and will turn off when
the battery is fully charged.
Before charging, please check the contents of the battery
use section of the safety instructions carefully to avoid
unnecessary losses!
< TRANSMITTER FUNCTIONS >
Mode 1:
To enter MODE 1, turn on the transmitter while holding the
“Speed Switch” button on the transmitter.
(Please do not release the “Speed Switch” button until the
transmitter is powered on.)
Turn ON/OFF
Speed Switch
360° Flip
Headless Mode
One Key Start/
Landing
Forward/ Backward;
Rotate to Left/ Right
Ascend/ Descend;
Fly to Left/ Right
Indicator Light
-8-
-9-
Always pay attention to the battery polarity when install
the batteries to make sure they are fitted correctly.
AA Batteries
(NOT INCLUDED)
Battery
Compartment
Battery Cover
