background image

4. Never use anything other than the approval LiPo charger the 
battery. Always use a balancing charger for LiPo cells or a LiPo cell 
balancer. It is recommended that you do not to use any other 
charger than  the one provided with the product. 
5. The battery temperature must never exceed 60°C(140°F) 
otherwise the battery could be damaged or ignite. 
6. Never charger on a flammable surface, near flammable products 
or inside a vehicle (perferably place the battery in a non-flammable 
and nonconductive container).
7. Never leave the battery unattended during the charging process. 
Never disassemble or modify the housing’s wiring, or puncture the 
cells. Always ensure that the charger output voltage corresponds to 
the voltage of the battery. Do not short circuit the batteries.
8. Never expose the LiPo battery to moisture or direct sunlight, or 
store it in a place where temperatures could exceed 60°C(car in the 
sun, for example).   
9. Always keep it out of reach of children. 
10. Improper battery use may result in a fire, explosion or other 
hazard.
11. Non-rechargeable batteries are not to be recharged. Recharge-
able batteries are only to be charged under adult supervision. 
12. Different types of batteries or new and used batteries are not to 
be mixed. 
13. Batteries are to be inserted with the correct polarity. 
14. The supply terminals are not to be short-circuited. Regular 
examination of transformer or battery charger for any damage to 
their cord, plug, enclosure and other parts and they must not be 
used until the damage has been repaired.
15. The packaging has to be kept since it contains important 
information.
16. The toy is only to be connected to Class II equipment bearing 
the symbol.

We, Xiamen Huoshiquan Import & Export CO., LTD
hereby, declare that the essential requirements compliance with 
the 
Directive 2014/53/EU, the RoHS Directive 2011/65/EU and Safety 
Directive 2009/48/EC have been fully fulfilled on our product with 
indication below:
Product Name: Remote control four axis series
Model/Mark : HS165/HOLYSTONE
The Statement of compliance is available at the following address:
http://www.holystone.com/Download/CE/HS165_EU_DOC.pdf

This product can be used across EU member states. 

MANUFACTURER INFORMATION

Manufactured by
Xiamen Huoshiquan Import & Export Co.,Ltd.  
Room 703,No. 813-2 Xiahe Road, Siming District, XIAMEN, China
+1(855)

 

888-6699

EU RF Power(EIRP): 22.75dBm (2404MHz ~ 2480 MHz)

Caution

1.The max operating of the EUT is 45°C. and shouldn’t be lower 
than -10°C.
2.The device complies with RF specifications when the device used 
at  0mm  form your body.
3.Declaration of Conformity.

-39-

-40-

Summary of Contents for HS165























Reviews: