-15-
-16-
10.4 Calibrating the Compass
Step 1:
Simultaneously push the left stick
to top right corner and the right
stick to the top left corner. The
front Blue lights and the rear
White lights will interval flash
quickly.
Step 2:
Hold the drone horizontally and
rotate the drone three times, the
rear lights will turn solid White.
Step 3:
Hold the drone vertically and
rotate the drone three times.
When the drone indicator light
flash changes, the transmitter
sends a long beep. Compass
calibration is now complete.
10.5 GPS Searching
( DO NOT use GPS Mode indoors )
ATTENTION:
①
If the LED Flight Indicators keep alternately flash slowly, it
indicates the drone is searching for GPS signals.
②
If the blue and white lights on the drone continue to flash
alternately after 1 minute, it indicates that the search for GPS
signal has FAILED. Please move the drone to an open area and
search again.
③
When flying indoors, press the GPS Mode Switch button
( ) to exit GPS Mode, and the LED lights will turn solid. You
can fly the drone when you complete the Compass Calibration
operations if you exit GPS mode.
Place the drone on a flat and dry surface and in an unobstructed
and lit area.
When the drone's front Blue lights and rear White lights alternately
flash slowly, it means that the drone is searching for GPS signal. The
process takes about a minute.
When all four lights on the drone are turned solid, the search for
the GPS signal is complete.
(The drone can only take off when it is connected to GPS successful-
ly. Please make sure that the number of GPS signals is
more than 7
satellites
before taking off.)
Only calibrate the compass when the drone is used for the
first time or the drone is subject to geomagnetic interfer-
ence.
