4/14
3. Insert the Battery: Insert the metal contacts of battery power forward and
place it down to battery slot.
4.
Place the Battery Cover: Place the battery cover with the locking catch on
the top of the battery slot and press the bottom of the cover into its place.
VI.
Turn on the Phone
Make sure the SIM card and battery are inserted correctly before you turn
the phone on. Press and hold the Power Key until the GPS Signal LED
(Green) illuminates. GSM mode will be activated first and you will see the
GSM Signal LED (Yellow) is flashing. After 3 seconds, the Power Signal LED
(Red) will illuminate and the GSM Signal LED (Yellow) will go off. Now, the
system is appeared as default and none of the function is activated. Wait for
another 3 seconds, when the Power Signal LED starts to flash, you can start to
use all the functions of the phone.
VII.
Turn off the Phone
To turn off the phone, press the Power Key until the Power Signal LED goes
off. A warning sound will remind you that the phone is in the process of turning
off. In the normal situation, the GSM Signal LED will flash and will go off after
5 seconds.
VIII.
Charge the Battery
Connect the charger plug to the power supply (plug the charger into the
cigarette lighter socket or AC wall outlet, depending on the type of plug), and
connect the mini-USB lead to the mini-USB socket located on the right of the
handset. When charging started, the Power Signal LED illuminates. After
charging is complete, the Power Signal LED resumes flashing.
IX.
Signals
1. GPS Signal: Light on indicates searching the satellite. Light flashing
indicates satellite is positioned.
2. GSM Signal: Quick flashing indicates calling, incoming call or receiving
messages. Light on indicates call or data communication is in process.
3. Power
Signal:
Normal Situation:
(1)
Battery full and satellite positioning successful: Flash once every 3
seconds
(2)
Battery full but satellite positioning failed: Flash twice every 3