Holtek HT- 960-202, User Manual

Page: 13 / 20

ENG
13
• Do not use abrasive and aggressive substances to clean.
• Do not immerse the kettle, stand and cord in water or other liquid.
• Clean the body with a slightly damp cloth or sponge. Clean dirt and stains with
a soft cloth dampened with a weak solution of gentle detergent.
• Remove the limescale in the kettle regularly. It is formed mainly on the heating
element, and prevents heating. The limescale formation rate depends on the
degree of water hardness and frequency of the use.
Descaling
• If the kettle is switched off before boiling, you have to remove the resulting
limescale in it.
• It is needed to descale regularly when ordinary use of the kettle at least 2
times a year.
• Using ordinary descaling agents, boil the solution in the kettle several times,
as described in the instructions attached to the agent. Then pour the solution
and rinse kettle.
• Also the limescale can be removed with the vinegar. To do this, fill the kettle
to the maximum point with the solution in the following proportions: 1 part
of vinegar and 2 parts of water. Turn on the kettle and wait until it turns off
automatically. Leave the solution in the kettle overnight. The next morning
pour the solution from the kettle. Fill the kettle with clean water up to the
maximum point and boil it. Pour the boiled water from the kettle to remove
the remains of the solution. Rinse the kettle with water.
Storing
• Unplug the appliance from the power system, drain the water, let it cool and dry.
• Keep the appliance in a clean, dry place out of reach of children.
• When storing the cord can be wound on the cable winding device, which
is at the bottom of the kettle stand. Never hang the appliance by the cord!
• Electrical equipment have to be stored in a dry place at ambient temperature
no higher than plus 40 °C with a relative humidity of 70%, and the absence of
dust, acid and other fumes in surrounding medium which affect adversely the
materials of the electrical devices.
Utilization
After the end of the service life do not discard the unit with household
waste. Hand it at an official collection point for recycling. Doing it you
will help protect the environment.
The manufacturer preserves the right to change the design and the
specifications of the unit without a preliminary notification.