BA45F56xx Wireless Transceiver Application
AN0571EN V1.00
7 / 14
November 5, 2020
Program Example Description
This program example utilises the function library to execute the TX/RX inter transmission function.
The FIFO Mode is selected as the transmission mode for which the operation flowchart is shown
in Figure 7. For TEST_SNIFF_RX, it is a continuous RX mode. The difference between the
continuous RX mode and the general RX mode is that when the receiving process has completed,
the RX mode should be started again ready for following use. The continuous RX mode will
automatically receive subsequent packets until the software transmits the Light Sleep command to
stop reception.
For the RF_MODE, users can select TEST_ITEM=TX or RX or SNIFF in the project settings. The
setting mode is shown in Figure 5 and Figure 6 below.
Figure 5
Figure 6
