IM-30-G
HOLOPHANE
HOLOPHANE
HOLOPHANE
HOLOPHANE
®
GranVille
®
Installation and
Maintenance
Manual
AFTER INSTALLATION DELIVER THIS
MANUAL TO OWNER
Simple
Arcadian
Fluted
Octagonal
Leaf
GR174A, GR173A, GR177A, GR176A, GR175B
IMPORTANT SAFETY INSTRUCTIONS
WARNING
–
READ THESE INSTRUCTIONS
CAREFULLY BEFORE ATTEMPTING TO INSTALL OR
MAINTAIN THIS FIXTURE. WORK MUST BE DONE BY
QUALIFIED PERSONNEL.
WARNING
–
BE CERTAIN THAT ALL ELECTRICAL
POWER IS DISCONNECTED
FROM THE FIXTURE BEFORE INSTALLING
OR MAINTAINING THE FIXTURE.
WARNING
–
FOLLOW LAMP MANUFACTURER’S
OPERATING AND MAINTENANCE INSTRUCTIONS.
FAILURE TO FOLLOW THESE WARNINGS
MAY RESULT IN DEATH, INJURY OR SIGNIFICANT
PROPERTY DAMAGE
.
1. INTRODUCTION
1.1 Product Description.
•
Granville luminaires are designed to produce three optional
patterns of light on the surface below. (3323 and 3324 optics
have house and street side orientation.)
•
Granville luminaires have been designed for easy maintenance
and repair of components.
•
The lamp can be accessed by disengaging four set screws
which secure the glass optics to the casting. The glass is then
removed from the unit to expose the lamp.
•
All electrical components are mounted on a cast plate, creating
a replaceable ballast assembly.
•
Access to the ballast assembly is made by removal of the optics
and socket plate.
1.2 Alternate Information Sources.
Holophane
Field Service Department
P.O. Box 3004
Newark, OH 43058-3004
(866) 759-1577
2. INSTALLATION
2.1 Tools and Material Required.
Table 1. Installation Tools and Materials
DESCRIPTION
USE
3/16” Allen wrench
3/8” set screws in pole fitter
7/16” wrench or socket
Set screws (mounting and optical)
¼” nutdriver or
Socket plate, and access cover screws
medium slotted
screwdriver
Torque wrench
Set screws
2.2 Fixture Installation.
2.2.1 Installation for Arcadian, Fluted, and
Octagonal Styles.
Refer to Figures 1, 2, and 3.
a. Wires in pole or tenon should enter the ballast housing via the
opening provided in the bottom of the wiring chamber.
DISCONTINUED