Phone:
+972 8-9409687/8
| Email:
| Website:
www.holoor.co.il
Contents
1.
Safety & Handling
2.
Introduction
3.
Technical information
4.
Installing the DOE Tuner
5.
Using the DOE Tuner
1. Safety & Handling
General recommendations for working with a laser:
http://web.princeton.edu/sites/ehs/laserguide/appendixB.htm
•
Don't place beam at eye level.
•
When leaning over a table, beware of beam directed upwards.
•
Don’t direct beam toward doors or windows.
•
Locate controls so that the operator is not exposed to beam hazards.
•
If you can see the beam through your laser eyewear, you are not fully
protected.
•
Don’t wear watches or reflective jewelry around Class 3B or 4 lasers.
•
Don’t wear neckties around Class 4 open beam lasers.
Alignment
•
Isolate process.
•
Use lowest practical power.
•
Use IR/UV viewing cards/eyewear.
Handling:
Use gloves
Mechanical damage Chemical
Dust
