Chapter 1: Introduction
4
Cenova™ Image Analytics Server 2.4 User Guide – MAN-03998 Rev 001
1.4.2.
Installation and Maintenance
m
WARNING!
Observe the following instructions that, if not followed, can result in a
hazardous condition:
•
The symbol next to the power connector indicates a potential shock hazard. To reduce
the likelihood of electrical shock or fire hazard, connect the computer only to a power
receptacle that is properly grounded and provides voltage and current within the
specifications of the server.
•
To connect primary power to the server, always use a three-conductor grounded power
cable that meets local regulatory standards. Use of a two-prong adapter disconnects the
utility ground and creates a severe shock hazard.
•
Cenova servers are heavy! If you have any concerns about lifting or positioning the
server, request assistance.
•
Before cleaning the server, always shut down the server according to the procedures in
this manual and disconnect the power cord to prevent electrical shock. Never use
alcohol, benzene, thinner, or other flammable cleaning agents.
m
CAUTION:
This product contains no user-serviceable parts. To prevent damage to the
server:
•
Maintain equipment in a well-ventilated, air-conditioned environment that meets the
temperature and humidity specifications provided in the product service manual.
•
Do not install or repair the Cenova server. Only trained personnel, authorized by
Hologic, are qualified to install or repair the server.
•
Disconnect power cord before moving or servicing.
•
Install the server behind the institution firewall for network security and antivirus
protection. Hologic provides no computer virus protection or network security for the
server. If antivirus software is required, visit the Hologic website for information on
Hologic’s cybersecurity program and antivirus software installation guidance.
c
c