SACD output format
settings:
Set the parameters as
shown in the figure below
via the Tools/SACD and
click > the
“
Apply
” button.
At this point, all the settings
are completed, click > the
"
OK
" button.
If "cyan" is not set as the system
default device but is occupied by
Foobar2000 alone, the volume of
Foobar2000 must be set to
100%
Note:
When playing DSD, the output volume of the system volume synthesizer in the task bar at the bottom of the
computer
must be
100%
Click on the volume icon in the circle in the taskbar, right >
click/open the volume synthesizer (M) to view and
operate.