Holms Dustbuster
14
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 160429.
Emptying the refuse collector
Lift up the machine and tilt it backwards so that the refuse
can drop out, see figure 5. Carefully rotate the roller a few
turns to free it from rubbish. If the sweeper is equipped
with side brushes, see “Operation” on page 15.
Disconnection from carrier
1. Release the hydraulic quick-couplings and electric
cable.
2. Release the machine attachment lock pins, and
carefully lower the machine to the ground. This is
important, otherwise the sweeper may be damaged.
3. When the machine reaches the ground, tilt forward
and then back to release the hooks.
Sprinkler
The pump must not be run when dry, i.e. once the water
has been used up the pump must be switched off.
The machine is equipped with two water filters to prevent
dirt getting into the system. One filter sits in the tank
filling hole, whilst the other filter is located on the suction
side of the pump. The filters can be flushed clean and
reused. NB! The filters must be in position when the tank
is filled, otherwise there is a danger that the pump and
water system will be damaged.
If there is a risk of freezing, empty the water from the
water tank, water pump and attendant hoses. The easiest
thing is to empty the tank first and then run the pump dry
for 20-30 seconds. When emptying the tank, the hose on
the tank can be disconnected using a quick-coupling.
Keep your distance. Look out for thrown objects.
Never leave the machine in the unfolded position.
Risk of crushing!
5.Sweeper in emptying
5.Sweeper in emptying
position