6. Pull the power cord through the center hole of the
assembled base (Fig. 6).
7. Align marking “B”, located at the center hole of the
assembled base, with marking “B” at the bottom end
of the pedestal. Insert the alignment post from the
pedestal into the alignment hole on base for proper
alignment (Fig. 7).
8. Use 4 screws (M4x10mm) provided to attach the
assembled base to the pedestal. Secure the screws
with a screwdriver (Fig. 8).
9. Wind the power cord underneath the base. Loosen
the cord clip and place cord inside the clip. Secure the
cord clip onto the base bottom with the 2 screws
(M4x12mm) provided (Fig. 9).
10. Turn fan right side up and place on a dry and level
surface before operating.
OPERATING INSTRUCTIONS (SEE FIG.
10, 11)
A. Power/Speed Settings
Press
= On, I, II, III, Off
B. Timer Control
Press = Turns Off in 1, 2, 4, 8 hours
C. Oscillation Control
Press
= Oscillation On, Off
D. Natural Breeze, Sleep Breeze Modes
Press
= Natural Breeze, Sleep Breeze
Natural Breeze Mode will cycle through the fan
speed settings randomly.
Sleep Breeze Mode
will cycle through the fan
speed settings in order.
F E AT U R E S - O P E R AT I O N S
Fig. 6
Fig. 10 Control Panel
A
D
B
C
Fig. 9
Fig. 8
B
B
Fig. 7
