SMC 4006 / 4006 C
01D19
R
e
pa
ir
&
Ma
int
e
na
nc
e
in
s
tr
u
c
ti
on
s
Res
cue
e
qui
pm
e
nt
Monthly maintenance recommendations (or after 10 hours of use)
Wear full protective gear during maintenance !
Always act according to the safety instructions as supplied with each tool !
Contact the Holmatro dealer if one of the items does not work properly !
•
Necessary equipment: see check list page 12.
Left: SMC 4006
Right: SMC 4006 C
Step 1
•
Check the operation of the tool by opening
and closing the cutter 2 times.
•
No cracking sounds can be heard.
•
Check the tool for damage and leaking. If the
tool doesn’t work properly and/or leaks,
contact the Holmatro dealer.
Step 2
•
Check coupler(s) and dust cap(s) for damage,
dirt and/or oil leakage.
•
Clean coupler(s) with a clean and soft cloth, if
necessary with water and soap.
•
If necessary grease with hydraulic oil or use
WD-40.
•
Check functioning coupler(s) (see page 13).
•
Reconnect loose dust cap(s) to coupler(s).
Step 3
•
Check whether the deadman’s handle returns
to it’s neutral position.
•
Check the operation of the deadman’s handle.
Have the Holmatro dealer repair the
deadman’s handle if it doesn’t function
properly.
Step 4
(only for tools with pigtail hoses)
•
Check pigtail hose(s) and mounting of the
couplers.
•
Replace the pigtail hose when:
o
damages are visible
o
the steel inner layer is visible
o
blisters are visible
o
obvious traces of kinks are visible
o
cuts are visible
o
protection spring is not mounted well
Step 5
•
Check the presence of the lock-nut.
Check if the upper moving part can move
freely.
•
If not, see page 8 step 9.
Step 6
•
Check the carrying handle for damage.
Replace a damaged carrying handle.
•
Check the attachment of the carrying handle.
If necessary, fasten it firmly by tightening the
wing screw.
3 -
3
