Holman 4A91H, Instruction Manual, Page: 17 / 21

Instructions – 4A91H
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 17
Step 6 – Install Actuator

Remove the hardware, as shown, from the tube on the rear bow.

Insert actuator extension into the tube and attach using the previously removed hardware.

Insert actuator assembly into the end of the actuator extension as shown below.

Bolt into place using two 5/16” x 1-3/4” hex head bolts, four 5/16” flat washers and two
5/16” nyloc nuts.

Tighten.